Cmd-PT4520g Electric High Pressure Airless Sprayer

CMD-PT4520G Electric High Pressure Airless Sprayer

The electric high-pressure airless sprayer is suitable for spraying various interior and exterior wall coatings and latex paints in factories and construction sites. It is also suitable for all common spraying raw materials and paints, from low viscosity to high viscosity epoxy resin and sealant, Various alkyl paints, varnishes, water-based paints, phenolic, alkyd amino, nitro, etc.


The airless sprayer uses a special electric, pneumatic or other power to drive a high-pressure pump to make the paint form a high pressure of 150-350Kg/cm2, and spray it instantaneously through an airless nozzle with a special shape and structure to form a very fine fan-shaped mist. All paints are quickly sprayed onto the coating surface without rebound and splashing, which not only saves 40% of paint and paint, but also has almost no paint mist, and can be sprayed on-site without a mask, thus reducing pollution and protecting the environment effect. Because the action efficiency of high pressure is 10-50 times higher than that of traditional sprayers, it can not only ensure the coating quality, but also greatly shorten and ensure the coating cycle. The coating quality is bright and smooth, and at the same time, it can spray high-viscosity paint, and it can also save thinner or not add thinner when spraying. Airless spraying can achieve a thin coating of 0.05-0.25mm, or even a thick coating of 1-2mm. Because the airless spray has no rebound, it is easy to get into the corners and edges when spraying the corners and edges, so that it can get a uniform bright and smooth coating. Because the atomization mechanism of the paint is formed into a mist by the high pressure of the paint itself, the paint in the atomized state does not contain compressed air, so it is called airless spraying.

Technical Parameter